Front Door: Adjustments

DOOR ADJUSTMENT - FRONT

NOTE: LH door shown, RH door similar.

1. NOTE: Make sure the rear door is within specifications before making any adjustments to the front door.

Remove the front fender.

2. Mark the position of the front door hinges to use as a reference point.







3. Loosen the 2 front door lower hinge-to-body bolts just enough to permit movement.







4. Loosen the 2 front door upper hinge-to-body bolts just enough to permit movement.







5. Loosen the front door upper hinge locator pin nut just enough to permit movement.
6. Adjust the front door to specifications.







7. Tighten the front door upper hinge-to-body bolts in the order shown.
- Tighten to 30 Nm (22 lb-ft).







8. Tighten the front door upper hinge locator pin nut.
- Tighten to 12 Nm (9 lb-ft).

9. Install the front fender.