Rear Door: Adjustments
DOOR ADJUSTMENT - REAR1. Remove the B-pillar trim panel.
2. Mark the positions of the rear door hinges to use as reference points.
3. Loosen the 2 lower interior rear door hinge-to-body nuts just enough to permit movement.
4. Loosen the 2 upper interior rear door hinge-to-body bolts just enough to permit movement.
5. Loosen the exterior upper rear door hinge locator pin nut just enough to permit movement.
6. Adjust the rear door to specifications.
7. Tighten the interior upper rear door hinge-to-body nuts in the order shown.
- Tighten to 30 Nm (22 lb-ft).
8. Tighten the exterior upper rear door hinge-to-body nut.
- Tighten to 12 Nm (9 lb-ft).
9. Check the front door adjustments.
10. Install the B-pillar trim panel.