Headliner: Service and Repair
HEADLINERPart 1:
Part 2:
Removal and Installation
1. Disconnect the battery.
2. Remove the digital versatile disc (DVD) player, if equipped.
3. Remove the A-pillar trim panels. Trim Panel
4. Remove the B-pillar trim panels.
5. Remove the C-pillar trim panels.
6. Remove the D-pillar trim panels.
7. Disconnect the electrical connectors from the inside rear view mirror and compass, if equipped.
8. Disconnect the electrical connectors from the wiring harness on the LH A-pillar and remove the harness from the A-pillar.
9. Remove the overhead console, if equipped.
10. Position the front and rear door weatherstrips aside.
11. Remove the sun visors.
- Remove the sun visor screws.
- Remove the sun visor.
- Disconnect the electrical connector, if equipped.
12. Disconnect the rear washer fluid hose connector on the RH A-pillar.
13. Remove the 2 garment hangers.
- Remove the screw.
- Remove the garment hanger.
14. Position the liftgate weatherstrip aside.
15. Disconnect the rear washer fluid hose connector on the RH D-pillar.
16. Remove the headliner rear pushpin.
17. Lower the headliner and disconnect the electrical connectors on the LH D-pillar.
18. CAUTION: To avoid bending or crimping the headliner, an assistant is required for this step.
Remove the headliner through the liftgate opening.
19. To install, reverse the removal procedure.