Roof Opening Panel Idler Track Mechanism
ROOF OPENING PANEL - EXPLODED VIEWExterior Trim, Seals, Fixed Glass And End Caps:
Air Deflector Assembly:
Sliding Glass, Blinds And Primary Seal:
Idler Track And Mechanism:
Front And Rear Sunshade Assembly:
Rear Trim Ring Assembly:
Roof Opening Panel Motor(s) And Electrical:
Motor Block And Drive Tube Assembly:
Guide Tracks And Mechanisms:
Front Guide Track Mechanism:
ROOF OPENING PANEL IDLER TRACK MECHANISM
Removal and Installation
1. Remove the roof opening panel sliding glass.
2. Remove the roof opening panel side trim.
3. Carefully slide the idler link forward and out of the front of the track.
4. CAUTION: Make sure the idler mechanism guide shoes are compressed and aligned correctly during installation. The guide shoes cannot be serviced separately.
To install, reverse the removal procedure.