Seat Cushion - Rear, 60 Percent

SEAT CUSHION - REAR, 60 PERCENT

Removal and Installation

All seats
1. Remove the 60 percent seat.

Seats equipped with heat
2. Disconnect the 2 heater mat electrical connectors. Separate the 2 heater mat electrical connectors from the backrest assembly.

All seats
3. Release the tab and remove the outboard cushion frame pivot bracket cover.
4. Release the tab and remove the inboard cushion frame pivot bracket cover.
5. Remove the 2 cushion frame pivot bracket bolts and the cushion assembly.
- To install, tighten to 25 Nm (18 lb-ft).

6. To install, reverse the removal procedure.