Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Tests AD: Heated Seat Is Inop - RR Seat Does Heat But Heated Seat Indicator Does Not Illuminate when Pressed
PINPOINT TEST AD: THE HEATED SEAT IS INOPERATIVE - RIGHT REAR SEAT DOES HEAT BUT THE HEATED SEAT INDICATOR DOES NOT ILLUMINATE WHEN PRESSEDAD1:
AD1-AD3:
AD3-AD4:
Normal operation
Pressing the right rear heated seat switch once in either the hi or low mode will commanded ON the left rear heated seat. Voltage is then supplied to the left rear heated seat switch from the heated seat module on either circuit CHS52 (BU) (hi heat mode) or circuit CHS53 (WH/BN) (low heat mode) illuminating the switch indicator. Pressing the right rear heated seat switch again in the mode that is currently on will set the right rear heated seat to OFF and also turn that LED OFF.
Possible Causes
An inoperative heated seat indicator can be caused by:
- wiring, terminals or connectors.
- a faulty heated seat module.
- a faulty heated seat switch.