Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Test W: The O/D Off Indicator Is Never/Always On
PINPOINT TEST W: THE O/D OFF INDICATOR IS NEVER/ALWAYS ONW1-W2:
W3-W6:
Normal Operation
The instrument cluster receives the overdrive (O/D) off signal from the PCM over the high speed controller area network (HS-CAN) communication bus. When the O/D function is selected off, the PCM sends a message to the instrument cluster to illuminate the O/D off indicator. If the speed control message is missing or if the data is deemed invalid by the instrument cluster for more than 5 seconds, the instrument cluster sets DTC U0100 in continuous memory and defaults the O/D off indicator off.
NOTE: If DTC U0100 is set in the instrument cluster, other observable symptoms may be an inoperative speedometer, tachometer or odometer.
Possible Causes
- PCM
- Instrument cluster