Test C: No Power In RUN

Pinpoint Test C: No Power In RUN
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
When the ignition switch is placed in RUN, fused ignition voltage is sent to:
^ Smart junction box (SJB) C2208b-45 along circuit CDC34 (WH/OG) and then to the SJB run bus.
^ Pin 1 of the run/start relay in the battery junction box (BJB) along circuit CDC34 (WH/OG).

Possible Causes
^ Circuit open
^ Run/start relay
^ Ignition switch
^ SJB
^ BJB

PINPOINT TEST C: NO POWER IN RUN

C1-C3:

C3-C4:

C5-C6: