Audio Unit Self-Diagnostic Mode (Premium CD6 Only)

AUDIO UNIT SELF-DIAGNOSTIC MODE (PREMIUM CD6 ONLY)

NOTE: To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be turned on and in the tuner mode (AM/FM).

1. To enter the following tests, press the desired preset button while in the speaker walk-around test or while in the audio unit self-diagnostic mode.
2. To exit the audio unit self-diagnostic mode, turn the ignition switch or the audio unit off.
3. If the concern remains and the fault is not detected, GO to Symptom Chart to continue diagnostics. Information and Entertainment System

Premium CD6 Audio Unit Diagnostic Tests:

4. The self-diagnostic mode has 5 manual tests available. To enter each test, simultaneously press and hold the appropriate buttons as listed.
5. To exit the self-diagnostic mode, turn the ignition switch off or the audio unit off
6. If the concern remains and the fault is not detected, GO to Symptom Chart to continue diagnostics. Information and Entertainment System