Speaker Walk-Around Test (Premium CD6 Only)

SPEAKER WALK-AROUND TEST (PREMIUM CD6 ONLY)

NOTE: To enter the speaker walk-around test or the audio unit self-diagnostic mode, the audio unit must be turned on and in the tuner mode (AM/FM).

1. To enter the speaker walk-around test, simultaneously press and hold the audio unit POWER button and the AUTO-S button.
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR and RR.
3. The speaker walk-around test will self cancel.