Luggage / Roof Rack: Service and Repair

ROOF RACK

Part 1:

Part 2:

Removal and Installation

NOTE: Individual components can be removed without following the entire sequence shown. LH and RH stopblocks are not interchangeable. Have an assistant help with sliding the inner roof rack assembly from the upper slide rails.

1. Remove the 4 screws and the roof rack air deflector.
- To install, tighten to 5 Nm (44 lb-in).

2. Remove the 2 screws and the 2 roof rack inner rack stop blocks.
- To install, tighten to 4 Nm (35 lb-in).

3. Remove the roof rack inner rack.
4. Remove the 2 screws and the roof rack cross bar.
- To install, tighten to 4 Nm (35 lb-in).

5. Remove the 6 screws and the 2 roof rack side bars.
- To install, tighten to 2 Nm (18 lb-in).

6. Remove the 8 screws and the 2 roof rack side bar bases.
- To install, tighten to 2 Nm (18 lb-in).

7. To install, reverse the removal procedure.