Brake Pedal Switch (BPS)

BRAKE PEDAL SWITCH (BPS)

The BPS used for vehicle speed control deactivation is a normally closed switch, which supplies positive battery voltage (+12 volts) to the PCM when the brake pedal is released. When the brake pedal is applied, the normally closed switch opens and power is removed from the BPS circuit to the PCM.

The normally closed BPS, along with the normally open BPP switch, is used by the PCM strategy for a brake pedal rationality test. The PCM strategy looks for each switch to change states when the brake pedal is applied and released. If a failure occurs in one or both of the brake pedal inputs a diagnostic trouble code (DTC) P1572 is set and the PCM misfire on board diagnostic (OBD) monitor is disabled.