Body Support - Number 1

Body Support - Number 1

Removal and Installation

No. 1 Body Support Mount

N0. 1 Body Support Mount:

1. Remove the body mount bolt.
- To install, tighten to 103 Nm (76 lb-ft).
2. Loosen the remaining body mount bolts.
3. Raise the vehicle body enough to remove the body mount bolts and body mount.
- To install, tighten to 55 Nm (41 lb-ft).

4. NOTE:
- No lubricants of any kind are to be used during body mount installation.
- Do not reuse body mount fasteners. New fasteners must be installed for each fastener that has been removed or loosened.

To install, reverse the removal procedure.