Body Support - Number 4

Body Support - Number 4

Removal and Installation

No. 4 Body Mount

N0. 4 Body Support Mount:

1. Remove the liftgate scuff plate.







2. Remove the body mount bolt cover.







3. Remove the body mount nut.
- To install, tighten to 55 Nm (41 lb-ft).
4. Loosen the remaining body mount bolts.
5. Raise the vehicle body enough to remove the body mount bolts.
- To install, tighten to 55 Nm (41 lb-ft).

6. NOTE:
- No lubricants of any kind are to be used during body mount installation.
- Do not reuse body mount fasteners. New fasteners must be installed for each fastener that has been removed or loosened.

To install, reverse the removal procedure.