Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Front Fender: Service and Repair
FENDERPart 1:
Part 2:
Exploded View
Removal and Installation
1. Remove the fender splash shield.
2. Remove the 2 front bumper cover-to-fender bolts.
- To install, tighten to 11 Nm (8 lb-ft).
3. Remove the fender-to-radiator support bolt.
- To install, tighten to 12 Nm (9 lb-ft).
4. Remove the 2 lower fender bolts.
- To install, tighten to 12 Nm (9 lb-ft).
5. Remove the headlamp.
- Remove the 2 headlamp bolts.
- Disconnect the electrical connectors.
6. Remove the cowl panel grille.
7. Remove the 4 upper fender bolts and remove the fender.
- To install, tighten to 12 Nm (9 lb-ft).
8. To install, reverse the removal procedure.