Body Support - Number 2 and Number 3

Body Support - Number 2 and Number 3

Removal and Installation

No. 2 Body Support Mount

NOTE: No. 2 body mount is shown, body mount No. 3 similar.

N0. 2 Body Support Mount:

Upper and lower body support mount
1. Remove the body mount bolt and lower body mount.
- To install, tighten to 80 Nm (59 lb-ft).

Upper body mount
2. Loosen the remaining body mount bolts.
3. Raise the vehicle body enough to remove the upper body mount.

Upper and lower body mount

4. NOTE:
- No lubricants of any kind are to be used during body mount installation.
- Do not reuse body mount fasteners. New fasteners must be installed for each fastener that has been removed or loosened.

To install, reverse the removal procedure.