Seat Cushion - Third Row, 60 Percent
SEAT CUSHION - THIRD ROW, 60 PERCENT60 Percent Cushion (Part 1):
60 Percent Cushion (Part 2):
Disassembly and Assembly
1. Remove the third row 60 percent seat.
2. Remove the third row 60 percent seat backrest.
3. Remove the inboard and outboard slide bracket-to-cushion frame nuts and remove the slide bracket from both sides of the seat cushion.
- To install, tighten to 15 Nm (11 lb-ft).
4. Remove the 2 seat riser-to-cushion frame bolts and the riser.
- To install, tighten to 30 Nm (22 lb-ft).
5. Release the cushion trim cover J-clips and remove the cushion frame.
6. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.
Separate the hook-and-loop strips and invert the trim cover to the row of hog rings.
7. Remove the row of hog rings and remove the trim cover.
8. To assemble, reverse the disassembly procedure.