Programming Memory Seat Positions

PROGRAMMING MEMORY SEAT POSITIONS

- A power driver seat position can be stored at any time. The driver must move the seat to the desired position using the driver seat control switch. The driver must then depress the memory set switch. Within 5 seconds, the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing memory switch 2.
- If no memory switch input is received within the 5-second time limit, the operation is aborted. If one of the following inputs is received during the 5-second programming limit, the operation is aborted:
- Power driver seat control switch
- Memory set switch
- Power adjustable pedal switch
- Power adjustable steering column switch (power tilt switch only, telescopic switch does not apply, if equipped)