Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lateral Accelerometer: Service and Repair

Stability Control Sensor Cluster

Stability Control Sensor Cluster:





Removal and Installation

NOTE: The lateral and longitudinal accelerometer and the roll rate sensor are located within the yaw rate sensor, stability control sensor cluster.

1. Remove the front floor console. For additional information, refer to Console.
2. Disconnect the stability control sensor cluster electrical connector.
3. Remove the 4 bolts and the bracket.
^ To install:
- Tighten the upper bolts to 9 Nm (80 inch lbs.)
- Tighten the lower bolts to 40 Nm (30 ft. lbs.)





4. Remove the 2 bolts and the stability control sensor cluster.
^ To install, tighten to 12 Nm (9 ft. lbs.)
5. To install, reverse the removal procedure.