Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION (CMP) SENSOR
Removal and Installation
LH camshaft position (CMP) sensor
1. Remove the air cleaner outlet pipe.
All CMP sensors
2. Disconnect the CMP sensor electrical connector.
3. Remove the bolt and the CMP sensor.
- To install, tighten to 10 Nm (89 lb-in).
- Lubricate the O-ring seal with clean engine oil prior to installation.
4. To install, reverse the removal procedure.