Wiper Motor - Rear Window

WIPER MOTOR - REAR WINDOW

Removal and Installation
1. Remove the rear wiper pivot arm.







2. Remove the rear window wiper motor grommet.
1 Remove the pivot shaft nut.
- To install, tighten to 10 Nm (89 lb-in).

2 Remove the grommet.

3. Open the liftgate window.







4. Remove the wiper motor cover trim panel.







5. Remove the rear window wiper motor.
1 Disconnect the electrical connectors.
2 Remove the 2 rear window wiper motor nuts.
- To install, tighten to 6 Nm (53 lb-in).

3 Remove the rear window wiper motor.

6. To install, reverse the removal procedure.