System Specifications

Timing chain guide bolts 10 Nm (89 inch lbs.)
Timing chain hydraulic tensioner bolts 25 Nm (18 ft. lbs.)

Crankshaft Pulley bolt
Using a new crankshaft pulley bolt, install the bolt and washer and tighten the bolt in 4 stages.
^ Stage 1: Tighten to 90 Nm (66 ft. lbs.)
^ Stage 2: Loosen 360 degrees.
^ Stage 3: Tighten to 50 Nm (37 ft. lbs.)
^ Stage 4: Tighten an additional 90 degrees.





Engine Front Cover
Position the engine front cover onto the dowels. Install the fasteners finger tight.





Tighten the engine front cover fasteners in sequence in 2 stages.
^ Stage 1: Tighten fasteners 1 through 15 to 25 Nm (18 ft. lbs.)
^ Stage 2: Tighten fasteners 6 and 7 to 48 Nm (35 ft. lbs.)











Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
^ Stage 1: Tighten to 20 Nm (15 ft. lbs.)
^ Stage 2: Tighten an additional 60 degrees.