Initial Roof Opening Panel Motor Initialization

INITIAL ROOF OPENING PANEL MOTOR INITIALIZATION

WARNING: The roof opening panel anti-trap function will not operate during the roof opening panel motor initialization procedure. Make sure that the roof opening panel opening is free of all foreign material. Failure to follow these instructions may result in personal injury.

NOTE:
- This procedure must be carried out when installing any roof opening panel motor or roof opening panel.
- The roof opening panel alignment must be carried out prior to carrying out the roof opening panel motor initialization.

1. Operate the roof opening panel control switch to the up/close position.
2. Release the roof opening panel control switch.
3. Operate the roof opening panel control switch to the up/close position again within 0.5 second until the roof opening panel stops (1 complete cycle).