D-Pillar Trim Panel

D-PILLAR TRIM PANEL-FREESTYLE

Freestyle (Part 1):

Freestyle (Part 2):

Exploded View

Removal and Installation
1. Remove the 3rd row safety belt anchor-to-floor bolt cover from the rear quarter trim panel.
2. Remove the 3rd row safety belt anchor-to-floor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

3. Remove the D-pillar trim panel.
- Remove the D-pillar trim panel screw cover and screw.
- Pull the D-pillar trim panel toward the inside of the vehicle to release the retaining tabs.

4. To install, reverse the removal procedure.