Disassembly and Assembly of Subassemblies

Cylinder Head

Special Tool(s):

Material:

Cylinder Head:

Disassembly

CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations.

1. Remove the hydraulic lash adjusters.
2. Using the special tool, remove the keys, retainer and spring.





3. Remove the valve from the cylinder head.
4. Remove the valve stem seal.

Assembly
1. Using the special tool, install the valve stem seal.





2. Install the valve.
3. Using the special tool, install the valve spring, retainer and key.





4. Install the hydraulic lash adjusters.
^ Lubricate the hydraulic lash adjusters with clean engine oil.