Body - Trunk Lid Will Not Latch
TSB 10-5-903/29/10
LUGGAGE COMPARTMENT LID SOLENOID STUCK OPEN
FORD:
2006-2010 Crown Victoria, Focus, Fusion, Mustang, Taurus
LINCOLN:
2006 Zephyr
2007-2010 MKZ
2009 MKS
MERCURY:
2006-2009 Sable
2006-2010 Grand Marquis, Milan
This article supersedes TSB 09-14-8 to update the Part List.
ISSUE
Some 2006-2010 vehicles may exhibit an inoperative luggage compartment lid solenoid. The solenoid may be stuck in the open position, preventing the luggage compartment lid from latching.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. With the luggage compartment lid open and the key in the accessory position, cycle the luggage compartment latch with the luggage compartment release button inside the passenger compartment. After hearing the latch actuate, attempt to close the luggage compartment lid.
a. If the lid closes no further action is required.
b. If the lid does not close go to Step 2.
2. Using the Work Shop Manual (WSM), Section 501-14, remove luggage compartment lid latch trim.
3. Check to ensure the electrical connector is fully seated into the luggage compartment lid release solenoid. Inspect the release T shaped interior handle for correct routing and free movement.
4. Cycle the luggage compartment latch per Step 1. If the lid still does not close, replace the latch assembly.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
100509A 2009 MKS, 2006-2010 0.4 Hr.
Fusion, Milan, Mustang,
2006 Zephyr 2007-2010
MKZ: Includes Time To
Diagnose and Replace The
Latch Assembly (Do Not
Use With Any Other Labor
Operation)
100509A 2006-2010 Crown Victoria, 0.4 Hr.
Grand Marquis, Taurus,
2008-2009 Sable: Includes
Time To Diagnose and
Replace The Latch
Assembly (Do Not Use
With Any Other Labor
Operation)
100509A 2006-2010 Focus: Includes 0.6 Hr.
Time To Diagnose and
Replace The Latch
Assembly (Do Not Use
With Any Other Labor
Operation)
DEALER CODING
CONDITION
BASIC PART NO. CODE
5443200 41