Manual Transaxle/Transmission - T5OD

Transmission Draining and Filling

Special Tool(s):

Material:

1. NOTE: Drain the transmission while the transmission fluid is warm.

Remove the drain plug.
^ Position a drain pan under the transmission.





2. Clean the drain plug. Apply thread sealant and install the drain plug.
^ Tighten to 18 Nm (13 ft. lbs).

3. NOTE: Prior to removal, clean the area around the fill plug.

Remove the fill plug.





4. NOTE: Do not overfill the transmission. This will cause transmission fluid to be forced out of the case.

Using a suitable oil suction gun, fill the transmission with the recommended fluid.
^ Transmission capacity is 2.6 liters (2.8 quarts).





5. Clean the fill plug. Apply thread sealant and install the fill plug.
^ Tighten to 18 Nm (13 ft. lbs).