Test H: The Stoplamps Are On Continuously

PINPOINT TEST H: THE STOPLAMPS ARE ON CONTINUOUSLY

H1-H4:

H5:

Normal Operation - Except STX
When the brake pedal is applied, the voltage is routed to the high mounted stoplamp and the multifunction switch through circuit CCB08 (VT/WH). The multifunction switch then routes the voltage to the LH and RH rear lamps through circuits CLS35 (VT) and CLS36 (YE), respectively.

Normal Operation - STX
When the brake pedal is applied, the voltage is routed to the high mounted stoplamp and the rear lamps through circuit CCB08 (VT/WH).

Possible Causes
- Circuit CBB38 (GY/BU) short to voltage
- Circuit CBB42 (GN) short to voltage
- Circuit CCB08 (VT/WH) short to voltage
- Circuit CLS35 (VT) short to voltage
- Circuit CLS36 (YE) short to voltage
- Stoplamp switch
- Multifunction switch