Intake Air Duct: Service and Repair
AIR CLEANER OUTLET PIPEPart 1:
Part 2:
Exploded View
Removal and Installation
1. Remove the mass air flow (MAF) sensor wiring harness pushpin and disconnect the crankcase ventilation tube quick connect coupling.
2. Loosen the 2 clamps and remove the air cleaner outlet pipe.
- To install, tighten to 3 Nm (27 lb-in).
3. NOTE: Visually check the engine air cleaner intake duct and outlet tube for any foreign objects, obstructions or punctures.
To install, reverse the removal procedure.