Fuel Tank Pressure Sensor: Service and Repair

FUEL TANK PRESSURE SENSOR

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Remove the fuel tank.







2. Disconnect the fuel tank pressure sensor electrical connector.

3. NOTE: The rear fuel tank vapor tube and fuel tank pressure sensor are an assembly and must be serviced as an assembly.

Disconnect the rear fuel tank vapor tube and fuel tank pressure sensor assembly-to-evaporative emissions (EVAP) canister quick connect coupling.

4. Disconnect the front fuel vapor tube-to-rear fuel tank vapor tube and fuel tank pressure sensor assembly quick connect coupling.
5. Remove the rear fuel tank vapor tube and fuel tank pressure sensor assembly.
6. To install, reverse the removal procedure.
- Carry out the leak test. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle