Test E: Flash Code 3 - Speed Control Deactivator Switch Circuit Failure

PINPOINT TEST E: FLASH CODE 3 - SPEED CONTROL DEACTIVATOR SWITCH CIRCUIT FAILURE

E1-E3:

E3 Continued:

Normal Operation
The speed control deactivator switch receives voltage through circuit CBP26 (BU/WH). When the brake pedal is not applied, voltage is sent to the speed control actuator, from the speed control deactivator switch, through circuit CES09 (VT/OG). When the brake pedal is applied firmly, the speed control deactivator switch opens, removing the voltage signal from the speed control actuator and disabling the speed control.

Possible Causes
- Fuse
- Circuit CBP26 (BU/WH) open
- Circuit CES09 (VT/OG) open
- Speed control deactivator switch
- Speed control actuator