Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Pneumatic Test
Pneumatic TestThis test verifies that the air lines are connected and that they are not restricted. It also verifies that the air compressor, air compressor vent solenoid and air spring solenoid valves are functioning correctly. Verify that the following conditions are met before running the Pneumatic Test.
^ All doors, the liftgate and the liftgate glass must be closed.
^ Transmission must be in PARK.
^ The vehicle speed is less the 10 km/h (6 mph).
^ The ignition switch is in the RUN position.
^ The air suspension service switch must be in the ON position.
^ Battery voltage is greater than 11 volts for the duration of the test.
1. Fulfill the pre-test conditions.
2. Follow the directions on the scan tool to carry out the Pneumatic Test.