Apply Components

Apply Components
There are 8 apply components used to drive or hold the planetary gearset components.

Band - Overdrive
The overdrive band holds the reverse clutch drum stationary in 4th gear and manual 2. This action causes the reverse sun gear to be held in these ranges.

Band - Low and Reverse
The low and reverse band holds the pinion carrier in reverse. The reverse band also applies in manual 1 position to provide engine braking.

Clutch - Intermediate
The intermediate clutch works with the intermediate one-way clutch to hold the reverse sun gear stationary in 2nd gear. The intermediate clutch remains applied in 3rd and 4th gears, but does not transmit power.

Clutch - Forward
The forward clutch couples the forward clutch cylinder and input shaft to the forward sun gear in 1st, 2nd and 3rd gears. The forward clutch is not applied in 4th gear.

Clutch - Direct
The direct clutch couples the input shaft to the planet carrier through the stub shaft in 3rd and 4th gears.

Clutch - Reverse
The reverse clutch couples the input shaft to the reverse sun gear, applied in REVERSE range only.

One-Way Clutch - Planetary (Low)
The planetary (low) one-way clutch is a roller clutch that holds the planetary gearset in 1st gear, (D) and D ranges. During automatic coasting downshifts into 1st gear ((D) and D ranges), the planetary one-way clutch freewheels so there is no engine braking.

One-Way Clutch - Intermediate
The intermediate one-way clutch works with the intermediate friction clutch to hold the reverse clutch drum and reverse sun gear stationary in 2nd gear during acceleration. The intermediate one-way clutch freewheels in 3rd gear and during coasting in 2nd gear, (D) and D ranges.