Windshield Washer Pump: Service and Repair

WASHER PUMP AND RESERVOIR

Exploded View

Front Wiper System:

Front Washer System:

Removal and Installation
1. Remove the battery tray.
2. Remove the windshield wiper reservoir nut and bolt.
- To install, tighten to 4 Nm (35 lb-in).

3. Disconnect the filler hose from the reservoir.
4. Disconnect the washer pump electrical connector and wiring harness locator.

5. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. Failure to follow these instructions may result in serious personal injury.

NOTE: If necessary, drain the windshield washer reservoir after removal.

Disconnect the windshield washer hose and remove the washer pump and reservoir.

6. CAUTION: Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so could result in premature pump failure.

To install, reverse the removal procedure.