Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> E 250 V8-4.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Ignition Switch Lock Cylinder >> Service and Repair >> Ignition Lock Cylinder - Functional
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Lock Cylinder - Functional

IGNITION LOCK CYLINDER - FUNCTIONAL







Removal and Installation

NOTE: When a new lock cylinder is installed, the door lock cylinder and ignition lock cylinder should be installed as a set. This eliminates carrying an extra key which will fit only one lock. If a new key is used, the new key code number is stamped on a metal tag attached to the key.

1. Disconnect the battery.
2. Remove the 3 screws and the lower steering column shroud.
3. Remove the ignition lock cylinder.
1 Turn the key to the ON position.
2 Using a suitable tool, press the ignition lock cylinder release pin while pulling out the ignition lock cylinder.

4. To install, reverse the removal procedure.
pro multis · About Operation CHARM