Removal and Replacement

BUMPER COVER - FRONT

Exploded View







Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 bolts from the top of the radiator grille.







3. Remove the 4 scrivets from the top of the radiator grille.







4. Remove the 3 lower pin-type retainers.







5. Remove the 6 fender splash shield screws (3 each side).







6. Remove the 4 lower screws (2 each side).







7. Disconnect the side marker lamp electrical connectors, if equipped.







8. Disconnect the fog lamp electrical connectors, if equipped.







9. Remove the front bumper cover.
- Pull the corner of the bumper cover from the bracket.







10. To install, reverse the removal procedure.