Liftgate Latch - Power

LIFTGATE LATCH - POWER

Exploded View

Manual Liftgate (Part 1):

Manual Liftgate (Part 2):

Power Liftgate (Part 1):

Power Liftgate (Part 2):

Removal and Installation
1. Remove the liftgate trim panel.
2. Remove the 2 liftgate release switch moulding bolts.
- To install, tighten to 9 Nm (80 lb-in).

3. Position the liftgate release switch molding aside.
4. Disconnect the liftgate latch electrical connector.
5. Remove the 3 liftgate latch screws.
- To install, tighten to 9 Nm (80 lb-in).

6. Remove the liftgate latch.

7. NOTE: Lubricate the liftgate latch after installation.

To install, reverse the removal procedure.