Headliner: Service and Repair

HEADLINER

Part 1:

Part 2:

Removal and Installation
1. If equipped, remove the DVD player.
2. Remove the A-pillar trim panels.
3. Remove the B-pillar trim panels.
4. Remove the C-pillar trim panels.
5. Remove the D-pillar trim panels.
6. Remove the LH and RH quarter trim panels.
7. If equipped, remove the power liftgate rod.
- Unclip the power liftgate rod from the motor assembly.
- Squeeze the clip as shown to release and position the rod assembly upward.







8. If equipped, disconnect the electrical connectors from the interior rear view mirror and compass.
9. Disconnect the electrical connectors from the wiring harness on the LH A-pillar and remove the harness from the A-pillar.







10. Remove the overhead console, if equipped.
11. Position the front and rear door weatherstrips aside.
12. Remove the sun visors.
- Remove the sun visor screws.
- Remove the sun visor.
- If equipped, disconnect the electrical connector.

13. Disconnect the rear washer fluid hose connector on the RH A-pillar.







14. Remove the 2 garment hangers.
- Remove the screw.
- Remove the garment hanger.

15. Position the liftgate weatherstrip aside.
16. Disconnect the rear washer fluid hose connector on the RH D-pillar.







17. Remove the headliner rear pushpin.
18. Lower the headliner and disconnect the electrical connectors on the LH D-pillar.







19. CAUTION: To avoid bending or crimping the headliner, an assistant is required for this step.

Remove the headliner through the liftgate opening.

20. To install, reverse the removal procedure.