Power-Fold Seat Motor - Rear Seat
POWER-FOLD SEAT MOTOR - REAR SEATExploded View
Rear Seat Cushion, 40 Percent:
Rear Seat Backrest, 40 Percent (Part 1):
Rear Seat Backrest, 40 Percent (Part 2):
Rear Seat Cushion, 60 Percent:
Rear Seat Backrest, 60 Percent (Part 1):
Rear Seat Backrest, 60 Percent (Part 2):
Removal and Installation
1. Remove the affected 40 percent or 60 percent seat.
2. Remove 2 screws and the outboard lower side shield.
3. Remove the power fold motor in the following sequence.
1 Remove the 2 screws from the power fold motor.
2 Slide the cable housing out of the recliner.
3 Turn the cable end so the tab aligns with the slot in the lever and separate the cable.
4 Remove the power fold motor.
4. To install, reverse the removal procedure.