60 Percent
SEAT CUSHION COVER - REAR, 60 PERCENTExploded View
Rear Seat Cushion, 40 Percent:
Rear Seat Backrest, 40 Percent (Part 1):
Rear Seat Backrest, 40 Percent (Part 2):
Rear Seat Cushion, 60 Percent:
Rear Seat Backrest, 60 Percent (Part 1):
Rear Seat Backrest, 60 Percent (Part 2):
Removal and Installation
NOTE: A new heater mat will come assembled on a new foam pad.
1. Remove the 60 percent seat.
2. Release all the cushion trim cover-to-cushion frame retainers and remove the cushion foam pad and cushion trim cover.
3. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strips, or the hook-and-loop strips can be torn from the cushion foam pad.
Remove the cushion trim cover in the following sequence.
1 Feed the heater mat wire harness and electrical connectors back through the cushion trim cover (if equipped).
2 Release the hook-and-loop strips.
3 Separate the cushion trim cover wire retainer from the clips in the cushion foam pad and remove the cushion trim cover.
4. To install, reverse the removal procedure.