60 Percent

SEAT CUSHION - REAR, 60 PERCENT







Disassembly and Assembly
1. Remove the 60 percent seat.
2. Remove the 60 percent seat cushion.
3. Remove the 2 bolts and the kneeling assembly.
- To install, tighten to 25 Nm (18 lb-ft).

4. Release all the cushion trim cover-to-cushion frame retainers and remove the cushion foam pad and cushion trim cover.

5. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strips, or the hook-and-loop strips can be torn from the cushion foam pad.

Remove the cushion trim cover in the following sequence.
1 Feed the heater mat wire harness and electrical connectors back through the cushion trim cover (if equipped).
2 Release the hook-and-loop strips.
3 Separate the cushion trim cover wire retainer from the clips in the cushion foam pad and remove the cushion trim cover.

6. To assemble, reverse the disassembly procedure.