Front Door Window Glass Weatherstrip: Service and Repair

DOOR GLASS TOP RUN - FRONT

Exploded View







Removal and Installation

NOTE: The front window motor must be de-initialized, then initialized whenever the LH or RH (MKX) or LH (Edge) front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.

1. Remove the front door window glass.
2. Remove the front door window glass inner weatherstrip.







3. Remove the front door glass top run.







4. To install, reverse the removal procedure.
- Make sure the top run is fully seated before reinstalling the front door window glass.
- The front window motor must be de-initialized, then initialized whenever the LH or RH (MKX) or LH (Edge) front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run. For additional information, refer to Window Motor Initialization. Testing and Inspection