Brake Caliper Support Plate

Brake Caliper Support Plate

Brake Caliper Support Plate:

Removal and Installation
1. Remove the brake disc shield.
2. Remove the 2 parking brake cable-to-support plate bolts, disconnect the parking brake cable from the lever and position the cable aside.
^ To install, tighten to 23 Nm (17 lb-ft).
3. Remove the 2 dust boot shield bolts and the dust shield.
^ To install, tighten to 10 Nm (89 lb-in).
4. Remove the dust boot.
5. To install, reverse the removal procedure.