Fan Blade: Service and Repair
Cooling Fan Motor and ShroudCooling Fan Motor and Shroud:
Removal and Installation
1. Remove the air cleaner assembly.
2. If equipped, detach the 2 block heater wiring clips from the radiator support.
3. Detach the wiring harness retainers and position the harness aside.
4. Position aside the upper radiator hose from the cooling fan motor and shroud.
5. Disconnect the cooling fan motor and shroud electrical connector.
6. If equipped, remove the bolt and position aside the oil cooler bracket.
^ To install, tighten to 6 Nm (53 lb-in).
7. Remove the 2 bolts and the cooling fan motor and shroud.
^ To install, tighten to 6 Nm (53 lb-in).
8. To install, reverse the removal procedure.