Test W: The O/D Off Indicator Is Never/Always On

PINPOINT TEST W: THE O/D OFF INDICATOR IS NEVER/ALWAYS ON

Normal Operation
The instrument cluster (IC) receives the overdrive (O/D) off signal from the PCM over the high speed controller area network (HS-CAN) communication bus. When the O/D function is selected off, the PCM sends a message to the instrument cluster (IC) to illuminate the O/D off indicator. If the speed control message is missing or if the data is deemed invalid by the instrument cluster (IC) for more than 5 seconds, the instrument cluster (IC) sets DTC U0100 in continuous memory and defaults the O/D off indicator off.

NOTE: If DTC U0100 is set in the instrument cluster (IC), other observable symptoms may be an inoperative speedometer, tachometer or odometer.

This pinpoint test is intended to diagnose the following:
- PCM
- Instrument cluster (IC)

W1-W2:

W2-W6: