Tests AE: DTC B1363 - Ignition Start Circuit Failure
PINPOINT TEST AE: DTC B1363 - IGNITION START CIRCUIT FAILURENormal Operation
DTC B1363 is a continuous memory DTC that sets if the instrument cluster (IC) receives an ignition START message for more than 15 seconds from the smart junction box (SJB) over the medium speed controller area network (MS-CAN) communication bus.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Ignition switch
- SJB
AE1:
AE2-AE5:
AE5-AE6:
