Air Cleaner Housing: Service and Repair

AIR CLEANER

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Disconnect the mass air flow (MAF) sensor electrical connector.
2. Loosen the clamp and disconnect the air cleaner outlet pipe from the air cleaner.
- To install, tighten to 5 Nm (44 lb-in).

3. Remove the air cleaner bolt.
- To install, tighten to 9 Nm (80 lb-in).

4. NOTE: No tools are needed to remove the air cleaner assembly. Removal should be carried out using hands only.

Separate the 2 air cleaner feet from the rubber grommets and remove the air cleaner assembly.

5. NOTE:
- Make sure that the 2 air cleaner feet are seated into the rubber grommets under the air cleaner assembly.
- The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

To install, reverse the removal procedure.