Test C: No Power In RUN

Pinpoint Test C: No Power in RUN
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
When the ignition switch is placed in the RUN position, fused ignition voltage is sent to:
^ the smart junction box (SJB) along circuit CDC34 (WH/OG).
^ pin 85 of the run/start relay in the battery junction box (BJB) along circuit CDC34 (WH/OG).

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Run/start relay
^ Ignition switch
^ SJB
^ BJB

C1-C3:

C3 (Continued)-C4:

C5-C6: