Dome Lamp: Service and Repair

INTERIOR LAMP

Front:

Rear:

Removal and Installation

Front

1. NOTE: Do not pull down on the front of the overhead console.

Pull down on the rear of the overhead console to remove the overhead console from the retaining clips.
- Disconnect the electrical connectors.

2. Release the 4 retaining clips and remove the lamp assembly from the overhead console.







3. Release the 6 retaining clips and remove the lens from the lamp assembly.

- NOTE: The bulbs can be pushed out from the backside of the lamp assembly.

Replace the bulb(s) as necessary.







Rear
4. Remove the interior lamp lens.







5. Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.







Any interior lamps
6. To install, reverse the removal procedure.