Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Escape 2WD L4-2.3L VIN Z >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair

STOPLAMP SWITCH







Removal and Installation

CAUTION: Do not service the brake pedal, brake booster, or master cylinder without first removing the stoplamp switch. Do not install the stoplamp switch without the brake pedal arm secured to the brake booster push rod. Do not press or pull on brake pedal when installing or removing the stoplamp switch otherwise misadjustment or damage to the stoplamp switch could occur.

1. NOTE: Rotate the stoplamp switch clockwise approximately 1/8 turn to remove.

Remove the stoplamp switch.
- Disconnect the electrical connector.

2. To install, reverse the removal procedure.
pro multis · About Operation CHARM